Gallery
Component Set /
Golden Age Isaac Haines Rifle
Parts included for each Component Set
Additional parts required
Preserving the key features of the long rifle, we offer the Golden Age sets with 42" and 44" long octagon swamped barrels. The forearms on these model are not carved forward of the lock mortise. Only the butt-stock (to include the fitting of the buttplate), wrist, lock mortise, barrel channel, ramrod groove and ramrod hole are carved/inletted. The tang, sideplate, trigger and triggerguard, and ramrod pipes are not inletted on the Golden Age stocks.
| Description | Caliber Available |
|---|---|
| Isaac Haines "Golden Age" with a 42" long barrel, "B" weight | .40, .45, .50 |
| Isaac Haines "Golden Age" with a 42" long barrel, "C" weight | .40, .45, .50, .54, .58 |
| The "C" model barrel is 1/16 of an inch larger across the flats; therefore, increasing the weight by approximately 1/2 a pound over the same caliber "B" model barrel | |
| Isaac Haines "Golden Age" with a 44" long barrel, "B" weight | .40, .45, .50
with Rice Dickert Barrel |
| Isaac Haines "Golden Age" with a 44" long barrel, "C" weight | .40, .45, .50, .54
with Rice Dickert Barrel |
| The "C" model barrel is 1/16 of an inch larger across the flats; therefore, increasing the weight by approximately 1/2 a pound over the same caliber "B" model barrel |
Check out Component Sets FAQs
| Price for Component Set, shipping and insurance | |
|---|---|
| Grade 4 | $795.00 |
| Grade 5 | $815.00 |
| Grade 6 | $845.00 |
| Grade 7 | $870.00 - $995.00 |
Prices for our component sets are determined by the grade of the piece of wood used for the stock.
These prices are for brass furniture. For Iron parts, deduct $45.00 from the listed price. Also, for those persons just starting, we highly recommend The Art of Building the Pennsylvania Long rifles as your reference guide.
We look forward to supplying your future gunstock needs
Parts included for each Component Set
(US made):
- A carved stock with cast-off and inletted for a swamp barrel
- Barrel staples or dovetail lugs
- Butt plate
- Front and rear sights
- Lock
- Ramrod pipes
- Side plate
- Tang and lock screws
- Trigger guard
- Trigger
Additional parts required
for assembly but
not provided:
- 6 steel pins to hold barrel and ramrod pipes in the stock
- Ramrod
- Vent or drum for ignition
- Wood screws for butt-plate and toe plate