Gallery
Component Set /
Transition Isaac Haines Rifle
Parts included for each Component Set
Additional parts required
These models are characterized by their short, balanced, 38" long barrel. Their stocks are carved and inletted full length. They can be assembled to shooting in the white by an experience gunsmith in 12 to 15 hours; and yet they can be highly decorated if so desired.
| Description | Caliber Available |
|---|---|
| Isaac Haines "Transition" with a 38" long barrel, "B" weight | .32, .36, .40, .45, .50 |
| Isaac Haines "Transition" with a 38" long barrel, "C" weight | .32, .36, .40, .45, .50, .54, .58 |
| The"C" model barrel is 1/16 of an inch larger across the flats; therefore, increasing
the weight by approximately 1/2 a pound over the same caliber "B" model barrel.
Only this model is available in left handed. |
Check out Component Sets FAQs
| Price for Component Set, shipping and insurance | |
|---|---|
| Grade 4 | $795.00 |
| Grade 5 | $815.00 |
| Grade 6 | $845.00 |
| Grade 7 | $870.00 - $995.00 |
Prices for our component sets are determined by the grade of the piece of wood used for the stock.
These prices are for brass furniture. For Iron parts, deduct $45.00 from the listed price. Also, for those persons just starting, we highly recommend The Art of Building the Pennsylvania Long rifles as your reference guide.
We look forward to supplying your future gunstock needs
Parts included for each Component Set
(US made):
- A carved stock with cast-off and inletted for a swamp barrel
- Barrel staples or dovetail lugs
- Butt plate
- Front and rear sights
- Lock
- Ramrod pipes
- Side plate
- Tang and lock screws
- Trigger guard
- Trigger
Additional parts required
for assembly but
not provided:
- 6 steel pins to hold barrel and ramrod pipes in the stock
- Ramrod
- Vent or drum for ignition
- Wood screws for butt-plate and toe plate
